SuperSonic Liftkleen™

SuperSonic LiftKleen

The Ultimate Performance Parts Washer

The TUS3725SL-model comes equipped with features to achieve ultimate parts cleaning levels. It is built to withstand rugged use in applications like engine rebuilding, performance racing, maintenance and manufacturing, but gentle enough to be used in the most delicate of cleaning applications.

Unlike standard spray cabinet washers, immersion cleaning exposes all surfaces of the part, including blind holes and small crevices, to the cleaning solution. By combining hands-off, total immersion cleaning, easy part load/unload, vertical lift platform agitation and ultrasonic cleaning action, the SuperSonic Liftkleen takes the benefits of the Sonic Liftkleen and offers the most thorough, intensive, and efficient ultrasonic immersion cleaning system available.

SuperSonic Liftkleen Standard Features:

  • Full PLC Control with Touch Screen Interface provides programmable cycles for ultrasonics, platform oscillation, soak, sparger, filtration and heater functions up to 180°F (82°C)
  • Ultrasonic frequency sweep continuously changes sound patterns to provide greater cleaning penetration while minimizing risk of damage
  • Heavy duty immersible sealed transducers evenly distribute the ultrasonic sound waves and eliminate cleaning blind spots
  • Pneumatic lift platform allows easy loading/unloading of parts up to 300 pounds and offers agitation capabilities for thorough parts cleaning
  • Automated lid open/close via pneumatic cylinder allows for hands-free operation
  • Built in weir and surface sparger system removes floating oil and debris from the top of cleaning solution so parts are not dragged through the floating contaminant at the end of the cleaning cycle
  • Oil skimmer removes oil from weir chamber
  • OPTIONAL High-Volume Filtration system constantly filters the cleaning solution to extend bath life and deliver more consistent cleaning
  • Double walled, fully insulated stainless steel tank and lid prevents heat loss, evaporation and reduces noise
  • Bottom drain and valve for easy change out of cleaning solution
  • 24/7 programmable heater and skimmer timers
  • Standard with Low Liquid Heater Protection to disable heaters and prevent damage to machine in a low liquid situation
  • Supervisor code in HMI to prevent parameter changes by operators
sslk1 sslk2 sslk3 sslk4 sslk5 sslk6

PLC controls cycle times, wash time, time for surface sparger spray to come on after the timed ultrasonic cleaning cycle and the operation of the lift platform.

The TUS3725SL unit has three ultrasonic generators to deliver 6,000 watts of peak power.

Heavy duty immersible drop-in sealed transducer packs.

Surface sparger system pushes floating oil and debris from top of cleaning solution into the built-in weir so parts are not dragged through the contaminant at the end. of the cleaning cycle.

Built-in weir traps the oil and debris so that those contaminants are isolated from the cleaning chamber and where the standard filtration system can remove any solids while...

The standard Belt-Type Oil Skimmer can remove oils, effectively increasing solution life.

Physical/Performance Specifications

Description

TUS3725SL

Tank Construction

Stainless Steel

Immersion Space (L x W x D)

37” x 25” x 14” (max. part height)

Overall Dimensions (L x W x D) (Lid Open)

55” x 66” x 72”

Platform Dimensions (L x W)

37” x 25”

Liquid Capacity

183 Gallons

Lift Capacity

300 pounds @ 100 PSI

Stroke Length

4”

Strokes per Minute

25 - 40

Air Inlet

3/8” NPT

Ultrasonic Power

6,000W

Ultrasonic Frequency

40kHz Standard, 25kHz and 68kHz Optional

Heater Control

Digital

Heater Range

Ambient to 180°F

Heater Power

6.75kW (13.5kW upgrade available)

Power Options

230/60/3

Click here to Request A Quote
or call us today at 1.773.248.6825 for more information about Graymills

no confusion no risk no worries