Superflo® Liquid Filters

superflow filters

ADVANTAGES to the Superflo® Filter:

Graymills Superflo® filters are designed to overcome the typical pressure drop and reduced flow due to clogging that occurs with ordinary filters.  A permanent magnet suspended over the intake port traps ferrous particles which find their way into fluid, and diffuses the flow outward into the filter screen flutes. 

Filtered material is trapped on the inside of the removable/reusable stainless steel filter cartridge.  To clean, just remove the cartridge.  All the contaminants come out with it. Graymills Superflo® filters are self-draining—no messy leftovers to deal with.

Click HERE for our Build-A-System Brochure!

superflo surge suppressor 

SUPERIOR CONSTRUCTION

  1. Lid designed with recessed seat and pressure ridge for positive gasket seal. Other manufacturers cut corners and use flat sealing surfaces that are prone to leaks and blowouts.
  2. Large, easy-to-grasp metal wing nuts threaded on stainless studs hold up to the rigors of daily use, unlike plastic components on competitive units. Blind threads eliminate dried contaminant build-up which can interfere with easy operation.
  3. Teflon ® coated inside and out. Repels fluids for easy cleaning. Will not peel, unlike nylon coatings on other filters.
  4. NEW stronger, smooth, easy to clean magnet suspended over inlet port to remove ferrous particles from the fluids before they can cause damage.
  5. Reusable stainless steel filter cartridge fits into inlet to assure all fluids pass through filter screen without any blow-by.  Fluted filter screen increases filtration capacity.
  6. Can mount directly or in-line with pump discharge. Self draining.

 

 Model EFST

Model EFST

  • 11-3/4” high x 5-3/4” wide
  • 1” NPT inlet port
  • 1” NPT outlet ports
  • Rugged vellumoid gaskets standard
  • High performance non-stick Teflon® coating.
  • Choice of four mesh screens: 30 mesh (590 micron), 60 mesh (250 micron), 100 mesh (150 micron), and 150 mesh (100 micron)

 

 

Model EFLT 

Model EFLT

  • 19-3/4” high x 5-3/4” wide
  • 1” NPT inlet port
  • 1” NPT outlet ports
  • Rugged vellumoid gaskets standard
  • High performance non-stick Teflon® coating.
  • Choice of four mesh screens: 30 mesh (590 micron), 60 mesh (250 micron), 100 mesh (150 micron), and 150 mesh (100 micron)

Click here to Request A Quote
or call us today at 1.773.248.6825 for more information about Graymills

no confusion no risk no worries