H2000 Series Centrifugal Ink Pumps

H2000 Series Centrifugal Ink Pumps

Centrifugal pump for use on narrow web, tape, tag, label, envelope, and smaller specialty presses. Tri-rod construction and Teflon coating for easy clean–up. Optional Quick Demountable motor. ATEX and CE compliant models available. High speed version, H2000H series, can be used for lifting heavier viscosity liquids to higher print decks and into chambered doctor blade systems that require more pressure. The H200H series delivers higher flow for top performance – for use on mid size flexographic and rotogravure presses.  Fits in 2, 5, 10, 20, and 30 gallon containers in standard or stainless steel.

Typical Applications

Narrow web, tape, tag, label, envelope, and smaller specialty presses.

Standard Features

  • Includes all standard and H-Series benefits
  • 3/4” NPT discharge
  • Round volute fits most ink tank sumps
  • Mounting plate on round-hole tank lids
  • Adjustable Agitor® plate for in-tank circulation

Optional Features & Accessories

  • CE or ATEX compliance
  • Mounting plate to permit pump to be used with keyhole-style tank lids
  • Quick Demountable motor. (Not available in ATEX-compliant models)
  • Metric lengths and threads available

Motor Options

  • 1/8 HP, 1725 RPM@60Hz (1450@50Hz) electric totally enclosed. For explosion-proof, consult factory.
  • Variable speed air motor
  • Dial-A-Flow™ variable speed electric
  • Quick Demountable motor. (Not available in ATEX-compliant models)
  • CE/ATEX motors

Motor Voltage/Air Options

  • E, F, KE, KF, GAM (#2)

Tank Options

  • 2 gallon stainless steel (H2002 only)
  • 5 gallon mild steel or plastic (H2005 only)
  • 10, 20, 30 gallon mild or stainless steel (H2005 only)


3/4” NPT discharge, 6” Dia. (152mm) mounting flange, with four 9/32” (7mm) motor mounting holes on 5 1/4” (133mm) B.C.

line artpumps chart

Pump and Tank Combinations

combo chart


— Dimensions may vary because of variations between motor manufacturers. If dimensions are critical, consult factory.

— Dimensions do not include pump handle.

* For Quick Demountable (QD) motor option, add 7 5/32” (182mm) to overall height.

Flow Rates

flow ratesflow rates

* Need more flow? Contact factory for assistance.

Flow test performed using water with horsepower, impeller, discharge, return as shown. Flow rates measured in gallons (and liters) per minute.

Click here to Request A Quote
or call us today at 1.773.248.6825 for more information about Graymills

no confusion no risk no worries