Tempest™ High-Pressure Manual Spray Washer

Tempest Parts Washers

The Tempest™ Series of aqueous cabinet parts washers uses 600 psi of high-pressure aqueous cleaning solution power to scrub parts clean—no abrasives to damage precision machined parts.

The ultimate in operator comfort, the Tempest™ 10S, and 20S keep the operator’s hands clean and out of cleaning solution. Operator simply slips hands into gloves and directs up to 600 psi fluid stream of heated cleaning detergent at parts.

Fast heat-up, illuminated cabinet and window-clearing blower are standard on both units. Flexible neoprene gloves, safe and convenient air-actuated on/off foot pedal switch, and ergonomic working height maximize user comfort and result in increased efficiency. Adjustable hand-held spray nozzle can be set to a wide fan or pinpoint stream to direct cleaning power where needed. 150 mesh filter traps chips and solids and continuously filters fluid.



Standard Features (All Models):

  • Stainless Steel upper cabinet and door assembly for long machine life.
  • Up to 600 PSI and 180 GPH, 1 HP pump delivers cleaning power directly onto parts
  • Heated (up to 120°F) aqueous fluid that cleans without grit
  • Enhanced window blow-off utilizing air-knife technology for viewing cleaning process
  • Hinged front opening door allows full access to entire cleaning chamber
  • Variable output nozzle can be set from a wide fan to a pinpoint stream to allow operator to adjust cleaning force as needed

Standard Features (Tempest™ 10S):

  • 8 gallon solution reservoir; easy-to-change internal pail fits neatly below spray cabinet

Standard Features (Tempest™ 20S):

  • 20 gallon rollout stainless steel reservoir makes fluid changes easy

PHYSICAL/PERFORMANCE SPECIFICATIONS

 

Tempest™ 10S

Tempest™ 20S

Cabinet Construction

Stainless Steel

Stainless Steel

Tank Construction

Mild Steel

Stainless Steel

Working Width

34”

34”

Working Depth

22-1/2”

39”

Working Height

24”

24”

Machine Width

41-1/2”

41-1/2”

Machine Depth

35-1/2”

44”

Machine Height

66”

66”

Maximum Parts Load

500 Pounds

500 Pounds

Operating Fluid Capacity

8 Gallons

20 Gallons

Maximum Spray Pressure @ Volume

600 PSI @ 180 GPH

600 PSI @ 180 GPH

Pump Power

1 Horsepower

1 Horsepower

Heater Power

1,000 Watts

1,500 Watts

Operating Voltage (Amps)

120VAC (15A)

120VAC (15A)

AVAILABLE OPTIONS

 

Tempest™ 10S

Tempest™ 20S

Air Blow-Off for Parts Drying

?

?

In-Tank Oil Skimmer

?

?

Elevated Drain Shelf

?

?

Ball-Transfer Table

 

?

Click here to Request A Quote
or call us today at 1.773.248.6825 for more information about Graymills

no confusion no risk no worries